|
Written by Administrator
|
|
Thursday, 12 March 2009 09:31 |
|

Chipset Intel® chipset - North bridge: Intel® 945G Express chipset - South bridge: Intel® ICH7R System Memory Four 240-pin DDR2 DIMM sockets Supports DDR2 533 and DDR2 667 DIMMs Supports dual channel (128-bit wide) memory interface Supports up to 4GB system memory Supports non-ECC x8 and x16 DIMMs Supports up to 1Gb DRAM densities Supports unbuffered DIMMs BIOS Award BIOS 8Mbit flash memory Power Management Supports ACPI specification and OS Directed Power Management Supports ACPI STR (Suspend to RAM) function Wake-On-Events include: - Wake-On-PS/2 Keyboard/Mouse - Wake-On-USB Keyboard/Mouse - Wake-On-LAN - Wake-On-Ring - RTC timer to power-on the system System power management supported CPU stopped clock control Microsoft®/Intel® APM 1.2 compliant Soft Power supported - ACPI v2.0 specification AC power failure recovery Hardware Monitor Monitors CPU/system/AUX temperature and overheat alarm Monitors Vcore/VCC3/VBAT/3VSB/12V/1.5V/1.8V/5V voltages and failure alarm Monitors CPU/2nd/system fan speed and failure alarm Read back capability that displays temperature, voltage and fan speed Watchdog Timer function Audio Realtek ALC662 5.1-channel High Definition Audio CODEC Six channel DAC support 16/20/24-bit PCM format for 5.1 channel audio solution Two stereo ADC support 16/20-bit PCM format All DAC/ADC support independent 44.1k/48k/96kHz sample rate 44.1k/48k/96kHz S/PDIF-out interface LAN Two Realtek RTL8111B PCI Express Gigabit controllers Supports 10Mbps, 100Mbps and 1Gbps data transmission - IEEE 802.3 (10/100Mbps) and IEEE 802.3ab (1Gbps) compliant Processor Socket LGA 775 socket for: - Intel® CoreTM2 Duo - Intel® Pentium® D - Intel® Pentium® 4 or Intel® Celeron - Intel® Celeron D - Supports Intel Enhanced Memory 64 Technology (EMT64T) - Supports Enhanced Intel SpeedStep Technology (EIST) - Supports Intel Hyper-Threading Technology - Supports 1066/800/533MHz FSB Graphics Integrated Intel Graphics Media Accelerator 950 Serial ATA Supports four SATA (Serial ATA) interfaces which are compliant with SATA 1.0 specification SATA speed up to 3Gb/s RAID 0, RAID 1, RAID 0+1 and RAID 5 IDE Supports up to UltraDMA 100Mbps hard drives Supports PIO IDE transfers up to 16MB/sec Rear Panel I/O Ports 1 mini-DIN-6 PS/2 mouse port 1 mini-DIN-6 PS/2 keyboard port 1 DB-25 parallel port 1 DB-9 serial port - 1 DB-15 VGA port 2 RJ45 LAN ports - 4 USB 2.0/1.1 ports Line-in, line-out and mic-in I/O Connectors 2 connectors for 4 additional external USB 2.0/1.1 ports 1 connector for an external COM 2 port 1 Digital I/O connector 1 front audio connector for line-out and mic-in jacks 1 CD-in internal audio connector 1 S/PDIF-out connector 1 connector for IrDA interface 4 Serial ATA connectors 1 40-pin IDE connector 1 floppy connector 1 chassis open connector 1 24-pin ATX power connector 1 4-pin 12V power connector 1 front panel connector 3 fan connectors Expansion Slots 1 PCI Express x16 slot 6 PCI slots PCB 4 layers, ATX form factor 30.5cm (12") x 24.4cm (9.6") Recommended CPU (s): Embedded processors: CP HH80547RE077CN Intel Celeron D 2.93 GHz LGA FC, 533 MHz FSB CP HH80552RE088512 Intel Celeron D 3.20 GHz LGA FC, 533 MHz FSB CP HH80557PG0332M Intel Core 2 Duo, 1.80 GHz LGA FC, 800 MHz FSB CP HH80557PH0462M Intel Core 2-1066 MHz FSB CP HH80547PG0801MM Intel Pentium 4 HT 3.0 GHz LGA FC, 800 MHz FSB CP HH80547PG0961MM Intel Pentium 4 HT 3.4 GHz LGA FC, 800 MHz FSB CP HH80552PG0962M Intel Pentium 4 HT 3.4 GHz LGA FC, 800 MHz FSB CP HH80557RG041512 Intel Celeron 400 Seq. 2.0 GHz LGA FC, 800 MHz FSB
|
|
Last Updated ( Monday, 06 April 2009 08:13 )
|